ENtri Publications 

1988-1995

Rudolph, V., The onset of square nosed slug flow in fluidized beds, Chemeca 88, Sydney, Australia, 705‑710, 1988.Rudolph, V. and Judd, M.R., An analysis of stress fields occurring in fluidized beds of particles with particular reference to slugging systems, Chem. Eng. Comm., 80, 101‑111, 1989.

Zhang, J.Y., Rudolph, V. and Leung, L.S., Non-fluidized flow of gas-solids in standpipes under a negative pressure gradient, Fluidization, eds J.R. Grace, L.S. Shemilt, M.A. Bergougnou, Engineering Foundation, 153‑161, 1989.

O,Dea, D.P., Rudolph, V. and Leung, L.S., Fluidization in inclined beds, Chemeca 89, Gold Coast, Australia, 337‑344, 1989.Zhang, J.Y., Rudolph, V. and Leung, L.S., Standpipe flow against a negative pressure gradient, Chemeca 89, Gold Coast, Australia, 337‑344, 1989.

Rudolph, V. ed. Improved drying for industry, agriculture, mining, Short course, Gold Coast, Australia, pub by Dept Chem Eng, University of Qld, p ‑332, 1989.

Agnew, J.B., Agarwal, P.K., Manzoori, A.R. and Rudolph, V., Gasification of Australian coals in fluidized beds, Japan-Australia workshop on characterization and use of Australian coals, Osaka, Japan, 1989.

Zhang, J.Y., Rudolph, V. and Leung, L.S., Flow stability of standpipes in circulating fluidization systems, Circulating Fluidized Bed Tech. 3, eds P. Basu, M. Horio, M. Hasitani, Pergammon, 633-639, 1990.

Zhang, J.Y., Rudolph, V. and Leung, L.S., Standpipe voidage in non-fluidized flow, Chemeca 90, Auckland, N.Z., 1990.

O'Dea, D.P., Rudolph, V., Chong, Y.O. and Leung, L.S., The effect of inclination on fluidized beds, Powder Technology, 63, 169-178, 1990.

O'Dea, D.P., Rudolph, V. and Chong, Y.O., Gas-solids flow through the bottom restriction of an inclined standpipe, Powder Technology, 62, 289‑295, 1990.

Sathiyamoorthy, D. and Rudolph, V., Hydrodynamics of a compartmented dense phase circulating gas fluidized bed, Circulating Fluidized Bed Tech. 3, eds P. Basu, M. Horio, M. Hasitani, Pergammon, 505-511, 1990.

Sathiyamoorthy, D. and Rudolph, V., Measurement of particle density of porous aeratable powders by fluidization technique, Chemeca 90, Auckland, N.Z., 1990.

Rudolph, V., Chong, Y.O. and Nicklin, D.J., Standpipe modelling for circulating fluidized beds, Circulating Fluidized Bed Tech. 3, eds P. Basu, M. Horio, M. Hasitani, Pergammon, 49-64, 1990.

Greenfield, P.F., Oleskiewicz, J.A., Krol, A.A. and Rudolph, V., Novel approaches to sludge  treatment, AWWA Regional Conference - 1990, Australia, 1990.

Zhang, J.Y. and Rudolph, V., Transitional packed bed flow in standpipes, Symposium on Particulate Processing, San Diego, USA, 1990.

Rudolph, V., Selection and application of gas fluid bed reactors in the non-ferrous metals industry, Mineral Processing & Extractive Metallurgy Review, 1991.

Rudolph, V., Selection and application of gas fluid bed reactors in the non-ferrous metals industry, Int. Conf. on Advances in Chem. Met. 91, BARC, Bombay, 1991. (Invited paper).

Rudolph, V. and Zhang, J.Y., Control of solid flow through the orifice of a downcomer, MCGM91, Chengde, China, 1991.

Zhang, J.Y. and Rudolph, V., The effect of shear friction on solid flow through an orifice, I&EC Res., 1991.

Zhang, J.Y. and Rudolph, V., Transitional packed bed flow in standpipes, Can. J Chem. Eng., 69, 1242-1246, 1991.

Litster, J.D., Gupta, G., Rudolph, V. and White, E.T., Size hysteresis in a two dimensional model raceway, Chemeca 91, Newcastle, Australia, 476-483, 1991.

Johns, J.E., Rudolph, V. and Johns, M.R., Rate controlling processes in the steam distillation of tea-tree oil, Chemeca 91, Newcastle, Australia, 872-879, 1991.

He, Y.H. and Rudolph, V., Gas leakage through V-valves in a compartmented circulating fluidized bed, Chemeca 91, Newcastle, Australia, 493-498, 1991.

Johns, M.R. and Rudolph, V., Tea tree oil processing, Oils & Fats International, 5, 1991.

He, Y., Rudolph, V., Nicklin, D.J. and Chong, Y.O., Experimental investigation of circulating fluidized oil shale retort, 6th Australian Workshop on Oil Shale, Brisbane, Australia, 257-262, 1991.

Johns, M.R., Rudolph, V. and Johns, J.E., Steam distillation of tea tree oil, J Sci. Food and Agric., 52, 49-53, 1991.

Chong, Y.O., White, E.T. and Rudolph, V., Bagasse combustion in a fluidized bed, Proc. Aust. Soc. Sugar Cane Technol., 14, 326-333, 1992.

Zhang, J-Y. and Rudolph, V., Resolving non-fluidized standpipe flow problems, Fluidization 7, eds O. Potter, D. J. Nicklin, Engineering Foundation, 371-380, 1992.

Turner, I.W. and Rudolph, V., Convective and microwave enhanced drying of glass beads, IDS92, ed. A. Mujumdar, Elsevier Science, 553-572, 1992.

He, Y., Rudolph, V., Nicklin, D.J. and Chong, Y.O., Circulating fluidized oil shale retort, Fuel, 879-884, 1993.

Nott, B.A., Dearden, E.W., Heckenberg, N.R., Chong, Y.O. and Rudolph, V., Development of a microwave monitor for industrial fluidized beds, Chemeca 93, Melbourne, 545-550, 1993.

He, Y.H. and Rudolph, V., Control mechanism for gas crossflow in a compartmented dense phase CFB, 4th Internat. Conference on Circulating Fluidized Beds, Pittsburg, USA, 1993.

Kusters, K.A., Litster, J.D. and Rudolph, V., Fine particle synthesis by aerosol routes, Chemical Engineering in Australia, 18, 1, 13-17, 1993.

Rasul, M.G., Chong, Y.O., Rudolph, V., White, E.T. and Judd, M.R., Fluidized bed combustion of bagasse, Chemeca 93, 1, 373-378, Melbourne, 1993.

Zhang, J-Y. and Rudolph, V., Flow Cessation of standpipes in circulating fluidized systems, 4th Int Conf on Circulating Fluidized Beds, Pittsburg, USA, 1993.

Yan, H. and Rudolph, V., Solid circulation in a compartmented fluid bed gasifier, Chemeca 93, Melbourne, 497-502, 1993.

Nott, B.A., J., Heckenberg, N.R., Dearden, E.W., Rudolph, V. and Chong, Y.O., The fluctuation spectrum in microwave signals backscattered from a fluidized bed, Australian Conf on Optics, Lasers and Spectroscopy, Melbourne, 1993.

Krol, A., Rudolph, V. and Swarbrick, G., “Landfills: A containment facility or a process operation?” 2nd National Hazardous & Solid Waste Convention, Melbourne, Australia, May 1994.

Rudolph, V. Chong, Y.O. and Litster J.D., “Vapour phase synthesis of particles in a plasma conical fluidized bed”.  Vapour phase synthesis of materials, Kona, USA, Jan 1994.

Silvey, P., Blackall, L., Chugh, S., and Rudolph, V., “Lipid analysis in the study of microbial community structure in municipal solid waste”. Chemeca94, Perth, Australia, Sept 1994.

Rudolph, V., Chong, Y.O. and Litster, J.D., “Vapour synthesis of particles in a plasma/conical fluidized bed”. 6th AusIMM Extractive Metallurgy Conference, Brisbane, Australia, July 1994.

Gupta, G.S., Lister, J.D., Rudolph, V. and White, E.T., “A cold model study of liquid flow in the blast furnace lower zone”. 6th AusIMM Extractive Metallurgy Conference, Brisbane, Australia, July 1994.

Malos, J., Heckenberg, N.R., Dearden, E.W., Chong, Y.O. and Rudolph, V., “Initial tests on a microwave monitor for industrial fluidized beds”. Powder Technology, 78, 3, 287-290, 1994.

Rudolph, V. and Krol, A., “MSW Landfills - a research perspective”. Landfill 94, Banksia Foundation, North Ryde, NSW, 1994.

Chugh, S., Rudolph, V., Silvey, P., Pullammanappullil, P. and Blackall, L., “High technology landfills. Saving energy and the environment”. Chemeca94, Perth, Australia, Sept 1994.

Clarke, W., Rudolph, V., Chugh, S., Silvey, P., ”Enhancing the degradation process in Australian landfills”. ISWA Times, 4, 6-7, 1994.

Rudolph, V., Book review: CRC Handbook of Chemistry and Physics,  75th Ed., for Chemical Engineering in Australia, Chemical Engineering in Australia, Sept, 1994.

Wang, F.W., Cameron, I.T., Litster, J.D. and Rudolph, V., “Particle transport in flighted rotary dryers”. Drying94, eds V. Rudolph and R.B. Keey, The University of Queensland, 1994.

Rudolph, V. and Keey, R.B., eds, Drying94 vols A, B, &  Supplementary, The University of Queensland, 1402+, 1994.

Dearden, E.W., Nott, B.A., Heckenberg, N.A., Dasgupta, K., Litster, J.D., and Rudolph, V., “Doppler velocity studies in fluidized and spouted beds”. BrisPhys Conference, July, 1994.

Rasul, M.D., Rudolph, V. and Saxena, S.C., “Segregation potential in fluidized beds of mixed particles”. Powder Technology Forum, Denver, USA, 506-511, 1994.

Rasul, M.D., Rudolph, V., White, E.T. and Chong, Y.O., “Fluidization properties of bagasse”. Chemeca94, Perth, Australia, Sept 1994.

Yau, Y.H., Rudolph, V. and O'Dea, D.P., “The behaviour of inclined fluidised beds at high gas flow rates”. Transactions of the Hong Kong Institution of  Engineers, 1, 2, 51-64, 1994.

Clarke, W.P., Rudolph, V. and Van den Broek, B., “Enhancing the degradation process in landfills”., WMAA News, 16-17, Feb. 1995.

Chugh, S., Nopharatana, A., Pullammanappullil, P. Rudolph, V. and  Clarke, W.P., “Startup and operation of lysimeters for enhanced degradation of MSW”. 16th Federal AWWA Convention, Sydney, Australia, 697-703, 1995.

Cherian, K., Litster, J., Rudolph, V. and White, E.T., “Engineering diamond crystal shapes during combustion flame synthesis”. in Ravl, K.V. and Dismukes, J.P. (eds), Diamond Materials IV, Electrochem. Soc. Proc., 95-4, 342-346, 1995.

Cherian, K., Litster, J., Rudolph, V. and White, E.T., “Engineering diamond crystal shapes during combustion flame synthesis”. 4^th Int Symp on Diamond Materials, Reno, Nevada, 342-346, 1995.

Cherian, K., Litster, J., Rudolph, V. and White, E.T., “Evidence for slip and double spiral growth mechanism in combustion flame synthesized diamond”. 3rd International Conf on Applications of Diamond Films and Related Materials, Gaithersburg, Maryland, USA, 429-432, Aug 1995.

Cherian, K., Litster, J., Rudolph, V. and White, E.T., “Diamond needles and tips as engineered growth shapes”. Materials Research Soc., 1995 Fall Meeting, Boston, USA, Nov,1995.

Chugh, S., Clarke, W., Pullammanappullil, P., Nopharatana, A. and Rudolph, V., “Degradation of unsorted MSW by SBAR”. Landfill International Sardinia95, 1995.

Rasul, M.G. and Rudolph, V., “Mixing/segregation of binary particles in liquid solid fluidized beds”. Chemeca95, 4, 2-7, Adelaide, Australia, 1995.

Yan, H.M. and Rudolph, V., “Compartmented fluidized bed gasifier (a novel coal gasification process)”. Chemeca95, 2, 78-83, Adelaide, Australia, 1995.

Yan, H.M. and Rudolph, V., “ASPEN PLUS based simulation of a compartmented fluidized bed gasifier process”.  Chemeca95, 2, 84-90, Adelaide, Australia, 1995.

Rasul, M.G. and Rudolph V., “Segregation in fluidized beds”. Student Workshop on particle technology, NSW Acad of Sports, Narabeen, NSW, 1995.

Xu, X., Rudolph, V and Greenfield, P.F., “Measuring the environmental cost of landfill”. Modsim95, Newcastle, Australia, Nov, 1995.

He, Y.H. and Rudolph, V., Gas-solids flow in the riser of a circulating fluidized bed, Chemical Engineering Science, 50, 21, 3443-3453, 1995.

He, Y.H., Rudolph, V., Manzoori, A. R.  and Zhang, D. K., “A compartmented dense phase CFB for continuous coal combustion-gasification”. Australian Symposium on Combustion and 4th Australian Flame Days, Nov, 1995

Rasul, M.G. and Rudolph, V., “Layer inversion in gas fluidized beds”. Graduate workshop, Chemeca 95, Adelaide, Australia, 1995.

Wang, F.W., Cameron, I.T., Litster, J.D. and Rudolph, V., “A fundamental study on particle transport through rotary dryers for flight design and system optimisation”. Drying Technology Journal, 13, 5-7, pp1261-1278, 1995.

Keey, R.B., Mujumdar, A.S., Rudolph, V., (eds), “Selected papers presented at IDS94 - the 9^th International Drying Symposium”. Special Issue of Drying Technology Journal, 13, 5-7, 1995.

1996

Wang, F. Y., Cameron, I. T., Litster, J. D. and Rudolph, V., “Optimal design and operation of rotary dryers based on the rigorous particle transport model”, IDS96, Krakow, Poland, 1996.

Yan, H. M. and Rudolph, V. “A new method for measuring solid circulation rate in a compartmented fluidised bed gasifer”. Chemical Engineering Communication, 147, 133-144, 1996.

Cherian, K. A., Litster, J. D., Rudolph, V. and White, E. T. “Engineering diamond crystal shapes during combustion flame synthesis”. Diamond Materials IV, Electrochemial Society Proceedings, 95, 4, 342-346, 1996.

Cherian, K. A., Litster, J. D., Rudolph, V. and White, E. T., “Diamond needles and tips as engineered growth shapes”. in MRS vol416 – Diamond for electronic applications, Eds: D. L. Dreifus, A. Collins, T. Humphreys, K. Das and P. E. Pehrsson. USA, Materials Res Soc. 416, 241-247, 1996.

He, Y. H. and Rudolph, V. “The volume-average voidage in a riser operating in the dense phase regime”. Powder Technology, 89, 79-82, 1996.

Chugh, S., Pullammanappallil, P., Nopharatana, A., Chynoweth, D. and Rudolph, V., “Anaerobic digestion of municipal solids waste”. In Sustainable Energy & Environmental Technology, eds: P.F. Greenfield, C.Y. Liu, H.J. Tay, G.Q. Lu, Singapore, World Scientific, 467-474, 1996.

Clarke, W. P., Chen, J., Chugh, S., Nopharatana, A., Pullammanappallil, P., Rudolph, V., Silvey, P. and Chynoweth, P., “Laboratory studies of enhanced landfill bioreactors”. 3rd National Hazardous & Solid Waste Convention and Trade Exhibition, 403-408, 1996.

Clarke, W. P., Chugh, S., Pullammanappallil, P. and Rudolph, V., “Landfill stabilsation - bioreactors vs traditional methods”. Landfill Conference '96. Brisbane, 67-71, 1996.

da Costa, J. C. D., Lu, G. Q. and Rudolph, V., “Membrane based gas separation: potential energy recovery and greenhouse abatement applications”. In Sustainable Energy & Environmental Technology, eds: P.F. Greenfield, C.Y. Liu, H.J. Tay, G.Q. Lu, Singapore, World Scientific, 360-368, 1996.

Yan, H. M., Rudolph, V. and Zhang, D. K., “Coal combustion and gasification in a compartmented fluidised bed coal gasifier”. 26^th Int symposium on Combustion, Naples Italy, 3261-3267, 1996.

Xu, X. L., Rudolph, V. and Greenfield, P. F., “The prospects of landfill gas utilization in Australian cities”. In Sustainable Energy & Environmental Technology, eds: P.F. Greenfield, C.Y. Liu, H.J. Tay, G.Q. Lu, Singapore, World Scientific, 525-533, 1996.

Gupta, G. S., Litster, J. D., Rudolph, V., White, E. T. and Domanti, A. “Model studies of liquid flow in the blast furnace lower zone”. ISIJ International, 36 1, 32-39, 1996.

Li, Y. H., Lu, G. Q. and Rudolph, V., “A kinetic study on pyrolysis of Australian coals by thermogravimetric analysis”. Chemeca 96. G. Weiss. Canberra, Institute Engineers Australia. 3, 143-148, 1996.

He, Y. H. and RUDOLPH, V., “A model for the riser of a dense phase circulating fluidised bed”. Circulating Fluidized Bed Technology 5, eds: M. Kwauk, J.Li, MSS21-8, 1996.

Xu, X., Rudolph, V. and Greenfield, P. F., “Evaluation of landfill externality”. 3^rd National Hazardous & Solid Waste Convention, 221-228, May 1996.

Rasul, M. G. and Rudolph, V., “Segregation potential in gas fluidized beds”. In Sustainable Energy & Environmental Technology, eds: P.F. Greenfield, C.Y. Liu, H.J. Tay, G.Q. Lu, Singapore, World Scientific, 350-359, 1996.

Rasul, M. G., Rudolph, V. R. and Carsky, M., “Buoyancy force in fluidized beds of mixed particles”. Chemeca 96. Ed: G. Weiss, Institute Engineers Australia. 5, 63-68, 1996.

Liu, L. X., Rudolph, V. and Litster, J. D. “A direct current, plasma fluidized bed reactor: its characteristics and application in diamond synthesis”. Powder Technology, 88 , 65-70, 1996.

Cherian, K., Litster, J., Rudolph, V. and White, E.T., Chemi-mechanical polishing of diamond: new possibilities, 10th International Conf. on surface modification technologies, Singapore, Sept, 1996.

Cherian, K., Litster, J., Rudolph, V. and White, E.T., Observations on a new growth mechanism in combustion flame diamond, acc for joint Diamond 1996, 7th European Conf on diamond, diamond-like and related materials & 5th Int Conf on new diamond science and technology, Tiurs, France, Sept, 1996.

1997

Li, Y.H., Lu, G.Q. and Rudolph, V., “The kinetics of NO-Char reaction”. Environmental Engineering Research Event 1997. Eds: C. Biggs, P.A. Lant and G. Swain, Advanced Wastewater Management Centre, 105-110, 1997.

da Costa, J. C. D., Lu, G. Q. and Rudolph, V. “Membrane-based gas separation: Potential energy recovery and greenhouse abatement applications”. Development in Chemical Engineering and Mineral Processing, 5, 12, 89-100, 1997.

da Costa, J. C. D., Lu, G. Q. and Rudolph, V., “Preparation of molecular sieving silicate membranes for upgrading landfill gas”. Environmental Engineering Research Event 1997. Eds: C. Biggs, P. A. Lant and G. Swain, Advanced Wastewater Management Centre, 51-56, 1997.

Chen, J., Rudolph, V. and Clarke, W., “A fundamental study of flow in landfill using beds of surrogate deformable particles”. Environmental Engineering Research Event 1997. Eds: C. Biggs, P. A. Lant and G. Swain, Advanced Wastewater Management Centre, 39-44, 1997.

Cherian, K. A., Litster, J. D., Rudolph, V. and White, E. T., “Chemical etching of diamond revisited: Past basic research as guide to new processing technologies”. Material Research Society Fall '97, 1997.

Gupta, G. S., Litster, J. D., White, E. T. and Rudolph, V. “Flow visualisation study in porous media using X-rays”. Steel Research, 10, 434-440, 1997.

Gupta, G. S., Litster, J. D., White, E. T. and Rudolph, V. “Nonwetting flow of a liquid through a packed bed with gas cross-flow”. Metallurgical and Materials Transactions B, 28B, 597-604, 1997.

He, Y. and Rudolph, V. “A model for a dense phase circulating fluidized bed”. Chemical Engineering Communications, 161, 103-124, 1997.

Xu, X., Rudolph, V. and Greenfield, P. F., “Landfill management in Australia urban areas”. Proceedings of ISWA '97 World Conference. New Zealand, 21-28, 1997.

Xu, X., Rudolph, V., Greenfield, P. F. and Li, Q., “Investigating the subsidies in Australian MSW landfill management”. Environmental Engineering Research Event 1997. Eds: C. Biggs, P. A. Lant and G. Swain, Advanced Wastewater Management Centre, 195-200, 1997.

Xu, X., Rudolph, V. and Greenfield, P. F. “Landfill gas utilisation trends in Australia,” Developments in Chemical Engineering and Mineral Processing, 5 1/2, 129-142, 1997.

1998

Li, Y. H., Lu, G. Q. and Rudolph, V. “The kinetics of NO and N2O reduction over coal chars in fluidised-bed combustion”. Chemical Engineering Science, 53 1, 1-26, 1998.

Xu, X., Rudolph, V. and Greenfield, P. F., “Cost-benefit analysis of municipal solid waste (MSW) disposal technologies: Sanitary landfilling vs bioreactor landfilling”, Sustainable Energy & Environmental Technology, Eds: G.Q. Lu, V. Rudolph, P.F. Greenfield, UQ Press, 623-628, 1998.

Li, Y.H., Lu, G.Q., Rood, V, Rudolph V. and Rostam-Abadi, M. “The role of discrete pore structure in NOx reduction by char-carbons”, Sustainable Energy & Environmental Technology, Eds: G.Q. Lu, V. Rudolph, P.F. Greenfield, UQ Press, 473-478, 1998.

da Costa, J.C.D, Lu, G.Q. and Rudolph, V., “Molecular sieving silicate membranes for gas separation”, Sustainable Energy & Environmental Tech, Eds: G.Q. Lu, V. Rudolph, P.F. Greenfield, UQ Press, 51-57, 1998.

Chen, J., Clarke, W. and Rudolph, V., “Modelling the effect of particle deformation on flow through beds of soft particles”, Sustainable Energy & Environmental Technology, Eds: G.Q. Lu, V. Rudolph, P.F. Greenfield, UQ Press, 311-317, 1998.

Sustainable Energy & Environmental Technology, Eds: G.Q. Lu, V. Rudolph, P.F. Greenfield, UQ Press, pp656+, 1998.

Chugh, S., Clarke, W.P., Pullammanappallil, P. and Rudolph, V., “Biogasification of municipal solid waste”, Chemeca 98, Paper No. 170, 1998.

Li, Q., Wang, F.Y., Rudolph, V. and Sonwane, C.G., “Computer-simulated study of deformation of regular packings”, Chemeca 98, Paper No. 171, 1998.

Rigby, S., Cherian, K.A., Litster, J.D., Rudolph, V and White, E.T., “Engineering diamond growth and morphology: development of a regime map for alpha”, Chemeca 98, Paper No. 191, 1998.

Leong, K.C., Lu, G.Q. and Rudolph, V., “Prediction of coating thickness of thin metallic plates in a fluidized bed”, Chemeca 98, Paper No. 266, 1998.

Leong, K.C., Lu, G.Q. and Rudolph, V., “Fluidized-bed coating of thin metallic plates with nylon-11 and polyethylene powders”, Chemeca 98, Paper No. 265, 1998.

Chen, J., Rudolph, V. and Clarke, W., “Pressure drop through packed beds of deformable particles”, Chemeca 98, Paper No. 182, 1998.

Zhou, S.J., Mowla, D., Wang, F.W. and Rudolph, V., “Experimental investigation of food drying processes in dense phase fluidized bed with energy carriers”, Chemeca 98, Paper No. 368, 1998.

Leong, K.-C., Lu, G. Q., Bhatia, S. K. and Rudolph, V. “Modelling of heat transfer in fluidized-bed coating of thin plates”. Chemical Engineering Science, 53, 6, 1307-1310, 1998.

Zhang, J.-Y. and Rudolph, V. “Flow instability in non-fluidized standpipe flow”. Powder Technology, 97 2, 109-117, 1998.

Chugh, S., Clarke, W., Pullammanappallil, P. and Rudolph, V., “Effect of recirculated leachate volume of MSW degradation”, Waste Manage Res., 16, 6, 564-573 1998.

Lu, G.Q. and Rudolph, V. eds. “Adsorbents and catalysts for clean energy and emissions control”, Energy & Fuels, 12, 6, 1998.

da Costa, J.C.D., Williams, T., Lu, G.Q. and Rudolph, V., “Characterisation of templated and non-templated Xerogels structure”, Environmental Engineering Research Event, A.I. Schafer, L. Bason and B.S. Richards, 171-176, 1998.

1999

Leong, K.C., Lu, G.Q. and Rudolph, V., “An upper bound solution for the coating thickness of cylinders in a fluidized bed”, Chemical Engineering Science, 54, 8, 1145-1149, 1999.

Li, Y., Lu, G.Q. and Rudolph, V., “Compressibility and fractal dimension of fine coal particles in relation to pore structure characterisation using mercury porosimetry”, Part. Part. Syst. Charact., 16, 25-31, 1999.

Xu, X., Rudolph, V. & Greenfield, P.F., “Australian urban landfills: Management and economics”, Waste Manage Res., 17, 171-180, 1999.

Leong, K.C., Lu, G.Q. and Rudolph, V., “A comparative study of fluidized-bed coating of cylindrical metal surfaces with various thermoplastic polymer powders”, J. Mat. Process Tech., 89-90, 354-360, 1999.

Rasul, M.G., Rudolph, V. and Carsky, M. “Physical properties of bagasse”, Fuel, 78, 905-910, 1999.

Li, Y.H., Radovic, L.R., Lu, G.Q. and Rudolph, V. “A new kinetic model for the NO-carbon reaction”, Chemical Engineering Science, 54, 4125-4136, 1999.

Rasul, M.G., Rudolph, V. & Carsky, M., “Segregation potential in binary gas fluidised beds”, Powder Technology, 103, 175-181, 1999.

da Costa, J. C., Lu, G. Q., Zhu, H. Y. and Rudolph, V. “Novel composite membranes for gas separation: preparation and performance”. Journal of Porous Materials, 6, 143-151, 1999.

Chugh, S., Chynoweth, D.P., Clarke, W., Pullammanappallil, P, and Rudolph, V. “Degradation of unsorted municipal solid waste by a leach-bed process”, Bioresource Technol., 69, 103-115, 1999.

Rigby, S., Cherian, K. A., Litster, J., Rudolph, V. & White, E., “Quantifying CVD diamond growth and morphology: a useful technique for studying growth kinetics”, in Diamond 1999, (Diamond 1999, Prague, 13- 17 September), 1999.

Diniz Da Costa, J., Lu, G. and Rudolph, V., “Templated Xerogels for molecular seiving applications”, in The Fifth IUMRS International Conference on Advanced Materials, (IUMRS-ICAM '99, Beijing, China, 13-18 June), International Union of Materials Research Society, China, pp.II43, 1999.

Rasul, M. G. and Rudolph, V., “Segregation potential in multi-component particulate fluidized beds”, in Control of Particulate Processes VI, United Engineering Foundation, USA, 1999.

2000

Rasul, M.G. and Rudolph, V. “Fluidized bed combustion of Australian bagasse”, Fuel, 79, 123-130, 2000.

da Costa, J. C., Lu, G. Q. and Rudolph, V. “Characterisation of templated xerogels for molecular sieving application”. Colloids and Surfaces, acc for publication, 2000.

Massarotto, P., Rudolph, V., Golding, S., Lombos, L., and Nix, K., “World-first true-triaxial stress, anisotropic permeability research facility for large coal samples”, Soc. Petroleum Engineers Annual Tech Conf, Dallas, USA, Oct, 2000.

da Costa, J. C., Rudolph, V. and Lu, G. Q. “Transport mechanism in weakly branched silica films”, Adsorption science and technology, Ed: D.D. Do, World Scientific, 381-385, 2000.

Rasul, M.G., Rudolph, V. and Wang, F.W. “Particle separation using fluidization techniques”, Internat. Mineral Proc., 60, 163-179, 2000.

Yan, H-M, and Rudolph, V. “Modelling a compartmented fluidised bed coal gasifier process using Aspen plus”, Chem Eng Comm., 183, 1-38, 2000.

Li, Q., Rudolph, V., Wang, F.Y, and Horio, M., “Axial porosity distribution in a packed bed of deformable particles – a numerical study based on DEM”, 3^rd Israeli Conf for conveying and handling of particulate solids, 21 May–1 June, Israel, 2000.

Massarotto, P., Rudolph, V and Golding, S. “Anisotropic permeability profiling under 3-D stresses and constant volume strain – preliminary coal and sandstone results”, Asia Pacific Oil & Gas Conf, Australia, Oct, 2000.

Massarotto, P., Rudolph, V. and Golding, S., “New 3-D permeability equipment helps solve methane release problems”, 2^nd International Methane Mitigation Conf., Novosibirsk, Russia, June, 2000.

Xu, X., Rudolph, V. and Greenfield, P.F., “Bioreactor landfill: Cheaper for MSW disposal?”, Sustainable Energy & Environmental Technology, Eds: X. Hu & P.L. Yue, World Scientific, 381-387, 2000.

Massarotto, P., Rudolph, V. and Golding, S., “Pipeline gas storage in coal”, Sustainable Energy & Environmental Technology, Eds:,  X. Hu & P.L. Yue, World Scientific, 375-381, 2000.

Massarotto, P., Rudolph, V., Golding, S. and Glicksman, M., “Geologic sequestration of CO2 and flue gases into deep aistralian coal seams”, Sustainable Energy & Environmental Technology, Eds: X. Hu & P.L. Yue, World Scientific, 369-375, 2000.

Rudolph, V., Lu, G.Q., Matthew, P., Wearing, C., et al “Afforestation of Sodic/Alkali Land in Australia rehabilitated using Japanese FGD Gypsum”, COP6, Netherlands, 2000.

Wang, G. X., V. Rudolph and J. D. Litster: “Numerical Simulation of Granular Flow under Gravity Using Discrete Treatment”, Proceedings of Third Joint China/USA Chemical Engineering Conference (CUChE-3), Beijing, China, Volume II, 09-020 - 09-028, 2000.

Chen, J., Pohl, J., Rudolph, V. and Harris, D., “Combustion mechanism of a single sphere”, 3^rd Australian coal science conference, Australian Institute of Energy, Brisbane, Australia, 2000.

Rigby, S.D., Cherian, K.A., Litster, J.D., Rudolph, V. and E.T. White, “Quantifying CVD diamond growth and morphology: a useful technique for studying growth kinetics”, Diamond and Related Materials, 9, 328–332, 2000.

2001

Ma, Q. and Rudolph, V., “Measurement and evaluation of moisture transport coefficients of wood by the unsteady state method”, World Congress of Chemical Engineering, Melbourne, Australia, 2001.

Leong, K.C., Lu, G.Q. and Rudolph, V., “Modelling of heat transfer in fluidised bed coating of cylinders”, Chem Eng Science, 56,17, 5189-5200, 2001.

Chen, J.Y., White, E.T., Pohl, J., Rudolph, V., and Harris, D., “Calibration of a micro-reactor to measure the burning rate of a single pulverized coal particle”, sub  Fuel, 2001.

Gupta, G.S., Vasanth Kumar, P., Rudolph, V. and Gupta, M., Heat transfer model for the Acheson process, Metallurgical and Materials Transactions, 32A, 1301-1308, 2001.

Leong, K.C., Lu, G.Q. and Rudolph, V., “The effect of latent heat of fusion on heat transfer in fluidised-bed coating of thin plates”, sub Chemical Engineering and Processing, 2001

Hon-Wen Chen, H-W and Rudolph, V. “The electron backscattering diffraction (EBSD) microanalysis study of diamond polycrystalline epitaxial growth mechanism by microwave plasma assisted CVD”, acc., ACEM17, 2001

Li, Q., Rudolph, V., Wang, F.Y, Kajikawa, S-I, and Horio, M., “Axial porosity distribution in a packed bed of deformable particles – a numerical study based on DEM”, Handbook of conveying and handling of particulate solids, eds:Levy & Kalman, Elsevier Science, 2001.

Massarotto, P., Rudolph, V. and Glicksman, M., “4-D Coal Permeability for Geological Sequestration of CO₂”, Pittsburg Coal Conf, Newcastle, Australia, 2001. 

Chen, J., Pohl, J., Rudolph, V. and Harris, D., “Combustion rate of single vitrinite particles”, ”, Pittsburg Coal Conf, Newcastle, Australia, 2001. 

Massarotto, P., Rudolph, V. and Golding, S., “CO2 and CH4 fluid transport studies with true triaxial stress coal permeameter” RITE & Japan International workshop on CO2 sequestration in coal seams” Japan, 2001. 

2002

da Costa, J. C., Lu, G. Q., Rudolph, V. and Lin Y.S.,  “Novel molecular sieve silica (MSS): characterization and permeation of single-step and two-step sol-gel membranes”. Journal of Membrane Sci., 198, pp9-21, 2002.

Patents

Improved Silica Membrane and process of production thereof, PQ 8113, da Costa, Lu & Rudolph, 2000.

A method of treating wet materials – PR9151, Rudolph & Lecomte, 2001.

P. Massarotto,  4-D coal permeability under true triaxial stress and constant volume conditions,  2002, PhD